Pass Authentic Fortinet NSE6_FSW-7.2 with Free Practice Tests and Exam Dumps
New NSE6_FSW-7.2 Exam Questions Real Fortinet Dumps
Fortinet NSE6_FSW-7.2 certification exam is designed for professionals who want to enhance their skills in managing and configuring FortiSwitch networks. Fortinet NSE 6 - FortiSwitch 7.2 certification validates your knowledge and skills in deploying FortiSwitches, configuring VLANs, and implementing security policies. Passing NSE6_FSW-7.2 exam will demonstrate your expertise in managing network devices and securing network traffic.
Candidates for the Fortinet NSE6_FSW-7.2 exam should have a strong understanding of networking fundamentals, as well as experience working with Fortinet products. NSE6_FSW-7.2 exam is designed to test the candidate's knowledge of the FortiSwitch platform and their ability to configure and manage various features and functions of the device. Upon passing the exam, candidates will receive the Fortinet NSE 6 - FortiSwitch 7.2 certification, which is recognized in the industry as a mark of expertise in Fortinet products and networking.
NEW QUESTION # 26
What is the role of a device that is simultaneously functioning as both the distribution and core in the hierarchy network model?
- A. FortiGate managing FortiSwitch
- B. HA backup FortiGate managing FortiSwitch
- C. POE with high density FortiSwitch
- D. FortiSwitch functioning as standalone
Answer: A
NEW QUESTION # 27
Exhibit.
port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
- A. STP triggered a loop and applied loop guard protection on port1.
- B. An endpoint sent BPDU on port1 it received from another interface.
- C. Oport1 was shut down by loop guard protection.
- D. Loop guard frame sourced from port 1 was received VLAN 10 ports.
Answer: C,D
NEW QUESTION # 28
Refer to the exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch. Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. port23 is configured as the dedicated management interface.
- B. A standalone switch with the shown serial number is connected on port23.
- C. port23 is a member of a trunk that uses the Access-1 FortiSwitch serial number as the name of the trunk.
- D. Ports connected to adjacent FortiSwitch devices show their serial number as the native VLAN.
Answer: B
NEW QUESTION # 29
What can an administrator do to maintain the existing standalone FortlSwltch configuration while changing the management mode to FortLink?
- A. FortiGate will automatically save the existing FortiSwitch configuration during the Forti-link management process.
- B. Use a migration tool based on python script to convert the configuration
- C. Register FortiSwitch to For1ISwitch Cloud to save a copy before managing by Forti-Gate.
- D. Enable the Forti-link setting on FortiSwitch before the authorization process
Answer: D
NEW QUESTION # 30
What are two ways in which automatic MAC address quarantine works on FortiSwitch? (Choose two.)
- A. FortiGate applies the quarantine-related configuration only on FortiGate.
- B. MAC address quarantine can be enabled through the FortiGate CLI only.
- C. FortiSwitch supports only by VLAN quarantine mode.
- D. FortiAnalyzer with a threat detection services license is required.
Answer: B,D
NEW QUESTION # 31
Exhibit.
LAG and MCLAG are used to increase the available network bandwidth and enable redundancy. How does spanning tree protocol see MCLAG and LAG if they are configured based on the physi-cal view shown in the exhibit? (Choose two)
- A. Switch 1. Switch 2, and Switch 3 are seen as one MCLAG peer group
- B. Switch 1 and Switch 2 both seen as one single switch.
- C. Switch 3 and switch 4 are seen as one MCLAG switch client
- D. Switch 3 and Switch 4 uplinks are treated as single interfaces.
Answer: B,C
NEW QUESTION # 32
Refer to the configuration:
Which two conditions does FortiSwitch need to meet to successfully configure the options shown in the exhibit above? (Choose two.)
- A. The Dort full speed prior to the split was 100G QSFP+.
- B. FortiSwitch would need to be rebooted.
- C. The split port can be assigned to a native VLAN.
- D. The FortiSwitch model is equipped with a maximum of 54 interfaces
Answer: B,D
NEW QUESTION # 33
Which statement about 802.1X security profiles using MAC-based authentication mode is true?
- A. FortiSwitch can grant each device a different access level based on the credentials provided
- B. FortiSwitch allows connectivity to all hosts connected to a port, if one host is authenticated.
- C. FortiSwitch must communicate with the RADIUS server to authenticate devices
- D. FortiSwitch performs faster when using this security mode on the ports.
Answer: A
NEW QUESTION # 34
Which LLDP-MED Type-Length-Values does FortiSwitch collect from endpoints to track network devices and determine their characteristics?
- A. Power management
- B. Network policy
- C. Inventory management
- D. Location
Answer: C
NEW QUESTION # 35
Which two types of Layer 3 interfaces can participate in dynamic routing on FortiSwitch? (Choose two.)
- A. Loopback interfaces
- B. Switch virtual interfaces
- C. Detected management interfaces
- D. Physical interfaces
Answer: A,B
NEW QUESTION # 36
Refer to the exhibit.
The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports, and these ports are connected to endpoints which are powered by PoE.
Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?
- A. Assign a new LLDP profile to handle different LLDP-MED TLVs.
- B. Define an LLDP-MED location ID to use standard protocols for power.
- C. Add power management as part of LLDP-MED TLVs to advertise.
- D. Create new a LLDP-MED application type to define the PoE parameters.
Answer: C
NEW QUESTION # 37
In which two ways can you assign a FortiSwitch port to a VDOM using multi-tenancy setup? (Choose two.)
- A. Switch the FortiLink interface to the target VDOM.
- B. Create a virtual port pool on the FortiGate CLI.
- C. Assign a port to a VDOM directly on the managed FortiSwitch.
- D. Remove the managed FortiSwitch and allocate ports directly on FortiSwitch.
Answer: B,C
NEW QUESTION # 38
How does FortiGate handle configuration of flow tracking sampling if you export the settings to a managed FortiSwitch stack with sampling mode set to perimeter is true?
- A. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces.
- B. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces.
- C. FortiGate configures and enables egress sampling on all management interfaces.
- D. FortiGate configures and enables flow sampling on FortiSwitch but does not change existing sampling settings of interfaces.
Answer: A
NEW QUESTION # 39
Which QoS mechanism maps packets with specific CoS or DSCP markings to an egress queue?
- A. Classification for ingress traffic
- B. Queuing for egress traffic
- C. Rate limiting for egress traffic
- D. Marking for ingress traffic
Answer: A
NEW QUESTION # 40
Which two rules used by MSTP are similar to rules used by other STP methods? (Choose two.)
- A. MSTP uses port role election, similar to rapid STP on the instances.
- B. MSTP uses timers for transitioning the ports, similar to regular STP.
- C. MSTP uses root bridge selection, similar to rapid STP
- D. MSTP uses alternate path and primary path, similar to regular STP.
Answer: C,D
NEW QUESTION # 41
Refer to the exhibits
Traffic arriving on port2 on FortiSwitch is tagged with VLAN ID 10 and destined for PC1 connected on port1. PC1 expects to receive traffic untagged from port1 on FortiSwitch.
Which two configurations can you perform on FortiSwitch to ensure PC1 receives untagged traffic on port1? (Choose two.)
- A. Remove VLAN 10 from the allowed VLANs and add it to untagged VLANs on port1.
- B. Add VLAN ID 10 as a member of the untagged VLANs on port1.
- C. Add the MAC address of PCI as a member of VLAN 10.
- D. Enable Private VLAN on VLAN 10 and add VLAN 20 as an isolated VLAN.
Answer: B,C
NEW QUESTION # 42
What type of multimode transceiver can be used to split a 40G port?
- A. SFP transceiver
- B. SFP+ transceiver
- C. QSFP transceiver
- D. QSFP+ transceiver
Answer: D
NEW QUESTION # 43
How are the 'by VLAN redirect MAC address quarantine' mode and the 'by redirect MAC address quarantine' mode on FortiGate similar?
- A. Both modes move quarantined devices to the quarantine VLAN.
- B. Both modes require firewall policies to block inter-VLAN traffic.
- C. Both modes add quarantined device MAC addresses to the blocked firewall address group.
- D. Both modes block intra-VLAN traffic by FortiGate automatically.
Answer: D
NEW QUESTION # 44
Refer to the exhibit.
Which two statements best describe what is displayed in the FortiLink debug output shown in the exhibit? (Choose two.)
- A. FortiSwitch is ready to push its new hostname to FortiGate.
- B. FortiSwitch is sending FortiLink heartbeats to FortiGate.
- C. FortiSwitch is discovered and authorized by FortiGate.
- D. FortiSwitch is in a waiting state to join the stack group on FortiGate.
Answer: B,C
NEW QUESTION # 45
......
NSE6_FSW-7.2 Exam Info and Free Practice Test Professional Quiz Study Materials: https://pass4sure.actualpdf.com/NSE6_FSW-7.2-real-questions.html
