Authentic 500-220 Dumps With 100% Passing Rate Practice Tests Dumps
Cisco 500-220 Real Exam Questions Guaranteed Updated Dump from ActualPDF
NEW QUESTION 33
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
- A. Captive Portal strength
- B. Simultaneous logins
- C. Firewall & traffic shaping
- D. RADIUS for splash page settings
- E. Controller disconnection behavior
Answer: A,E
NEW QUESTION 34
Which type of authentication protocol is used when using OSPF on an MX appliance?
- A. certificate
- B. plaintext
- C. SHA-1
- D. MD5
Answer: D
Explanation:
Reference:
Using_OSPF_to_Advertise_Remote_VPN_Subnets
NEW QUESTION 35
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?
- A. Meraki Insight
- B. MS Switch
- C. MV Smart Camera
- D. MR Access Point
Answer: D
NEW QUESTION 36
Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)
- A. intrusion prevention
- B. secondary uplinks
- C. DHCP
- D. site-to-site VPN
- E. high availability
Answer: A,D
Explanation:
Reference:
Passthrough_Mode_on_the_MX_Security_Appliance_and_Z-series_Teleworker_Gateway
NEW QUESTION 37
What is the role of the Meraki Dashboard as the service provider when using SAML for single sign-on to the Dashboard?
- A. The Dashboard generates the SAML request.
- B. The Dashboard generates the SAML response.
- C. The Dashboard provides user access credentials.
- D. The Dashboard parses the SAML request and authenticates users.
Answer: A
NEW QUESTION 38
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Answer:
Explanation:
NEW QUESTION 39
Which information do the MXs in a High Availability pair share?
- A. spanning-tree state
- B. time synchronization state
- C. stateful firewall database
- D. DHCP association database
Answer: A
NEW QUESTION 40
For which two reasons can an organization become "Out of License"? (Choose two.)
- A. licenses that do not match the serial numbers in the organization
- B. expired device license
- C. more hardware devices than device licenses
- D. MR licenses that do not match the MR models in the organization
- E. licenses that are in the wrong network
Answer: B,C
NEW QUESTION 41
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. highest VLAN ID that is configured and set to NO to use VPN
- B. lowest VLAN ID that is configured and set to YES to use VPN
- C. highest VLAN ID that is configured and set to YES to use VPN
- D. lowest VLAN ID configured and set to NO to use VPN
Answer: C
Explanation:
Reference:
Using_the_Ping_Live_Tool
NEW QUESTION 42
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. GET
- B. ADD
- C. PUT
- D. SET
- E. PATCH
- F. POST
Answer: A,C,F
Explanation:
Reference:
Cisco_Meraki_Dashboard_API
NEW QUESTION 43
One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used.
Based on client count, how many APs (rounded to the nearest whole number) are needed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 44
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
- A. Configure automatic updating of iOS devices in the Meraki installed profile.
- B. Create a profile with automatic update enabled and apply it to iOS devices.
- C. Create a security policy that enables automatic updates.
- D. No configuration step is necessary; automatic updating is the default behavior.
Answer: C
NEW QUESTION 45
Refer to the exhibit.
What is the minimal Cisco Meraki Insight licensing requirement?
- A. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.
- B. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.
- C. A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.
- D. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.
- E. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.
Answer: A
NEW QUESTION 46
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
- B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
- C. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
- D. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
Answer: A
NEW QUESTION 47
Refer to the exhibit.
For an AP that displays this alert, which network access control method must be in use?
- A. MAC-based access control with RADIUS server
- B. preshared key
- C. WPA2-enterprise with my RADIUS server
- D. splash page with my RADIUS server
Answer: B
NEW QUESTION 48
What are two organization permission types? (Choose two.)
- A. Full
- B. Monitor-only
- C. Write
- D. Read-only
- E. Write-only
Answer: A,D
Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions
NEW QUESTION 49
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. Currently associated clients stay connected.
- B. Currently associated clients are disconnected.
- C. Currently associated clients are affected by restrictive traffic shaping rules.
- D. New clients cannot connect.
- E. New clients can connect.
Answer: B,D
NEW QUESTION 50
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?
- A. The device is locked with a passcode.
- B. The device cannot connect to Apple servers.
- C. The device cannot connect to Cisco Meraki servers.
- D. The application requires the most recent iOS version.
Answer: A
NEW QUESTION 51
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
- A. Call Meraki support.
- B. Renew the Dashboard license.
- C. License a network.
- D. License more devices.
- E. Wait for the devices to auto-renew.
Answer: B,D
Explanation:
Reference:
Termination_Licensing_Overview
NEW QUESTION 52
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 2 as long as it is up.
- B. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- C. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- D. WebEx traffic will be load-balanced between both active WAN links.
Answer: B
NEW QUESTION 53
Refer to the exhibit.
What are two outcomes reflected in the Web App Health application? (Choose two.)
- A. Network #2 had better application performance than Network #1.
- B. Neither network recorded any server-side performance issues.
- C. Network #2 could not load Google because of a local client misconfiguration.
- D. Users on both networks may be experiencing issues when attempting to reach Google.
- E. Network #1 could not load Google because of a remote server issue.
Answer: B,E
NEW QUESTION 54
What is a feature of distributed Layer 3 roaming?
- A. An MX Security Appliance is required as a concentrator.
- B. All wireless client traffic can be split-tunneled.
- C. An MX Security Appliance is not required as a concentrator.
- D. All wireless client traffic is tunneled.
Answer: C
Explanation:
Reference:
Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/
Wireless_Layer_3_Roaming_Best_Practices
NEW QUESTION 55
Refer to the exhibit.
Which IDS/IPS mode is the MX Security Appliance configured for?
- A. quarantine
- B. detection
- C. blocking
- D. prevention
Answer: D
NEW QUESTION 56
......
Verified Pass 500-220 Exam in First Attempt Guaranteed: https://pass4sure.actualpdf.com/500-220-real-questions.html
