300-435 Practice Test Questions Updated 110 Questions
Cisco 300-435 Dumps - Secret To Pass in First Attempt
What Would Exam 300-435 Be Including?
There are certain topics to address as you come to the preparation for your 300-435 exam. These tested areas include Python programming, APIs, programming concepts, tools for automation, and controllers. Looking into the subject around the domains is to set oneself in the mood for the final exam. The entire process takes 1.5 hours, with the test being set in English & Japanese. The cost for registering and undergoing this testing procedure is $300 if you are based in the US. To affirm the content for the test so that you are entirely ready to face it, your preparation should be taken care of well. With the Cisco official training dedicated for 300-435 exam as well as study guides that can help in acquiring the intended concepts, you are good to go.
NEW QUESTION 47
When accessing the /device-detail endpoint in Cisco DNA Canter, what is an acceptable SearchBy parameter value?
- A. platform type
- B. MAC address
- C. IP address
- D. software version
Answer: B
NEW QUESTION 48
Refer to the exhibits.
An engineer creates a Python scripts using ncclient to display interface information. The code must be completed so that it can be tested. Which expression completes the highlighted section in the format call?
- A. intf_config
- B. intf_get
- C. intf_info
- D. intf_config[0]
Answer: A
Explanation:
The highlighted format cell for print is for the host.
NEW QUESTION 49
Refer to the exhibit.
A Python script is used to configure a Cisco IOS XE device. The script must be updated to print the IP addresses of all the loopback interfaces. Which statement should be added before the loop?
- A. interfaces = response.json()["ietf-interfaces:interfaces"]
- B. interface = response.json()["ietf-interfaces:interfaces"]["interface"]
- C. interface = response.json()["ietf-interfaces:interfaces"]
- D. interfaces = response.json()["ietf-interfaces:interfaces"]["interface"]
Answer: D
NEW QUESTION 50
What is the purpose of using the Cisco SD-WAN vManage Certificate Management API?
- A. to enable vManage Center
- B. to request a certificate from the certificate server
- C. to generate a CSR
- D. to allocate resources to the certificate server
Answer: C
NEW QUESTION 51 
Refer to the exhibit. A Python script has been created that calls the Cisco SD-WAN vManage Device Inventory API to get the list of vEdges. The JSON data that returns to a Python dictionary has been converted and assigned to a variable named "d". A portion of the JSON is shown in the exhibit. Which code will complete the expression hostname= to access the hostname?
- A. d("data")[0]("host-name")
- B. d[data][0][host-name]
- C. d["host-name"]["data"]{"0"}
- D. d["data"][0]["host-name"]
Answer: D
Explanation:
Section: Cisco SD-WAN
Explanation:
The double-quotations are a necessary syntax of Python. And for the json portion doesnt use parentheses. It always uses brackets. d["data"][0]["host-name"] is the only logical answer.
NEW QUESTION 52
The Cisco DNA Center Sites API must be used to add a device to a site, but only the site name is available.
Which API call must be used to retrieve the site identifier so that the device can be properly added to the network?
- A. /dna/intent/api/v1/site
- B. /dna/intent/api/site/siteId
- C. /dna/intent/api/site
- D. /dna/intent/api/v1/site/siteName
Answer: A
NEW QUESTION 53
During a network outage, a network administrator used the Cisco SD-WAN vManage Troubleshooting Dashboard APIs to troubleshoot the cause of the issue. Which detail is captured during troubleshooting with these APIs?
- A. VPN health
- B. OMP connection health
- C. connections summary
- D. public cloud resources
Answer: C
Explanation:
Section: Cisco SD-WAN
Explanation/Reference: https://sdwan-docs.cisco.com/Product_Documentation/Command_Reference/ Command_Reference/vManage_REST_APIs/Troubleshooting_APIs/Dashboard
NEW QUESTION 54
In which direction does the Cisco DNA Center Intent API communicate?
- A. westbound
- B. southbound
- C. eastbound
- D. northbound
Answer: D
Explanation:
Explanation
The Intent API is a Northbound REST API that exposes specific capabilities of the Cisco DNA Center platform. The Intent API provides policy-based abstraction of business intent, allowing focus on an outcome rather than struggling with individual mechanisms steps. The RESTful Cisco DNA Center Intent API uses HTTPS verbs (GET, POST, PUT, and DELETE) with JSON structures to discover and control the network.
NEW QUESTION 55
What does the command boot ipxe forever switch 1 perform when executed on a Cisco IOS XE device?
- A. It continuously sends DNS requests for iPXE until the device boots with an image.
- B. It continuously sends DNS requests for iPXE until the device restarts.
- C. It continuously sends DHCP requests for iPXE until the device boots with an image.
- D. It continuously sends DHCP requests for iPXE until the device restarts.
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-5/configuration_guide/prog/b_165_prog_3850_cg/ipxe.html
NEW QUESTION 56
Refer to the exhibit.
The task is to create a Python script to display an alert message when a Meraki MX Security Appliance goes down. The exhibit shows sample data that is received. Which Python snippet displays the device name and the time at which the switch went down?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 57
Which HTTP request is valid to create a new wireless network called "Demo Wireless Network" in the organization "QASD-EROA-MKAW"?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION 58
Which two network assurance features are provided by the Cisco DNA Center API? (Choose two.)
- A. Cisco APIC appliance health
- B. site health
- C. Cisco DNA Center appliance health
- D. client health
- E. license compliance health
Answer: B,D
NEW QUESTION 59
Which two features are characteristics of software-defined networks when compared to traditional infrastructure? (Choose two.)
- A. designed to change
- B. require software development experience to manage
- C. use overlay networks
- D. changed manually
- E. configured box-by-box
Answer: A,C
Explanation:
Section: Cisco DNA Center
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/VMDC/SDN/SDN.html
NEW QUESTION 60
Fill in the blank to complete the statement.
Answer:
Explanation:
ZTP
NEW QUESTION 61
Which two API calls must be issued to attach a device template in Cisco SD-WAN? (Choose two.)
- A. "monitor device action status" GET API request with the process ID to display the status of the attach action
- B. "monitor device action status" GET API request with the device ID to display the status of the attach action
- C. POST call to initiate the attach action
- D. PUT call to initiate the attach action
- E. GET call to initiate the attach action
Answer: A,C
Explanation:
Section: Cisco SD-WAN
Explanation/Reference: https://sdwan-docs.cisco.com/Product_Documentation/Command_Reference/ Command_Reference/vManage_REST_APIs/Device_Configuration_APIs/Device_Templates
NEW QUESTION 62
Refer to the exhibit.
Which XML tag completes this NETCONF telemetry subscription with a Cisco IOS XE device?
- A. crontab
- B. frequency
- C. period
- D. cadence
Answer: C
NEW QUESTION 63
With the MV Sense API, which REST endpoint provides LUX level?
- A. /merakimv/XXXX-XXXX-XXXX/raw_detections
- B. /merakimv/XXXX-XXXX-XXXX/light
- C. /merakimv/XXXX-XXXX-XXXX/zones
- D. /merakimv/XXXX-XXXX-XXXX/0
Answer: B
Explanation:
Section: Cisco Meraki
Explanation/Reference: https://developer.cisco.com/meraki/mv-sense/#!mqtt/lux-light-levels
NEW QUESTION 64
Refer to the Exhibit.
Which two parameters are mandatory when the Cisco Meraki API is used to create a network? (Choose two)
- A. name
- B. tags
- C. type
- D. disableMyMerakiCom
- E. time zone
Answer: A,C
NEW QUESTION 65
What are two characteristics of synchronous calls to APIs? (Choose two.)
- A. They make your application less portable, so asynchronous calls are preferred.
- B. They do not block while waiting for the API to be processed.
- C. They block until a response is returned from the servers.
- D. They can add perceived latency to your application if data is not received.
- E. They can be used only with certain programming languages.
Answer: C,D
NEW QUESTION 66
Which URI with the request body of Request body:
{"name":"Test","organizationId":<org_id>,"type":"appliance"} creates a new Meraki network called "Test", when using APIs?
- A. POST https://api.meraki.com/api/v0/organizations/<org_id>/networks
- B. POST https://api.meraki.com/api/v0/networks
- C. PUT https://api.meraki.com/api/v0/organizations/<org_id>/networks
- D. POST https://api.meraki.com/api/v0/organizations/<org_id>/networks/<net_id>
Answer: A
Explanation:
Reference:
https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Dashboard_API
https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Dashboard_API
NEW QUESTION 67
Refer to the exhibit. Interfaces named Loopback0, Loopback1, and Loopback2 must be created and enabled on a Cisco IOS XE target device in the lab group. Which loop must be added to the end of the Ansible "create int" task?
- A. with_items: "{{intlist}}"
- B. with_list: "{{intlist}}"
- C. with_groups: "{{intlist}}"
- D. with_parent: "{{intlist}}"
Answer: B
NEW QUESTION 68
......
Cisco 300-435 Exam Dumps [2022] Practice Valid Exam Dumps Question: https://pass4sure.actualpdf.com/300-435-real-questions.html
