2024 Realistic 300-730 Dumps Questions To Gain Brilliant Result
Start your 300-730 Exam Questions Preparation with Updated 177 Questions
NEW QUESTION # 53
Which redundancy protocol must be implemented for IPsec stateless failover to work?
- A. HSRP
- B. GLBP
- C. VRRP
- D. SSO
Answer: A
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike- protocols/17826-ipsec-feat.html
NEW QUESTION # 54
After a user configures a connection profile with a bookmark list and tests the clientless SSLVPN connection, all of the bookmarks are grayed out. What must be done to correct this behavior?
- A. Apply the bookmark to the correct group policy.
- B. Configure a DNS server on the Cisco ASA and verify it has a record for the web server.
- C. Verify HTTP/HTTPS connectivity between the Cisco ASA and the web server.
- D. Specify the correct port for the web server under the bookmark.
Answer: B
NEW QUESTION # 55
A network administrator wants the Cisco ASA to automatically start downloading the Cisco AnyConnect client without prompting the user to select between WebVPN or AnyConnect. Which command accomplishes this task?
- A. anyconnect ssl df-bit-ignore enable
- B. anyconnect ask enable default anyconnect
- C. anyconnect modules value default
- D. anyconnect ask none default anyconnect
Answer: D
Explanation:
https://networklessons.com/cisco/asa-firewall/cisco-asa-anyconnect-remote-access-vpn#:~:text=The%20anyconnect%20ask%20command%20specifies,of%20the%20anyconnect%20client%20automatically.
NEW QUESTION # 56
Which technology works with IPsec stateful failover?
- A. HSRP
- B. VRRP
- C. GRE
- D. GLBR
Answer: A
Explanation:
HSRP (Hot Standby Router Protocol). HSRP is a Cisco proprietary protocol that provides stateful failover for IPsec virtual private networks (VPNs). It is used to create a virtual router in order to provide redundancy in the event of an IPsec VPN failure. HSRP works by assigning a single primary router to manage the connection and forwarding traffic to the secondary router if the primary router fails.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnav/configuration/15-mt/sec-vpn-availability-15-mt-book/sec-state-fail-ipsec.html
NEW QUESTION # 57
An organization wants to implement a site-to-site VPN solution that must be able to support 350 sites with direct communications between all sites, fully encrypt the packet header and payload, and support propagation of routing information over IPsec. Which solution meets these requirements?
- A. GETVPN
- B. FlexVPN
- C. IPsec full mesh
- D. DMVPN
Answer: B
Explanation:
https://networklessons.com/cisco/ccie-enterprise-infrastructure/flexvpn-ikev2-routing
NEW QUESTION # 58
Which two NHRP functions are specific to DMVPN Phase 3 implementation? (Choose two.)
- A. resolution request
- B. registration reply
- C. resolution reply
- D. redirect
- E. registration request
Answer: C,D
NEW QUESTION # 59
A network engineer has almost finished setting up a clientless VPN that allows remote users to access internal HTTP servers. Users must enter their username and password twice: once on the clientless VPN web portal and again to log in to internal HTTP servers. The Cisco ASA and the HTTP servers use the same Active Directory server to authenticate users. Which next step must be taken to allow users to enter their password only once?
- A. Configure auto-sign-on using NTLM authentication.
- B. Use LDAPS and add password management to the clientless tunnel group.
- C. Create smart tunnels for the HTTP servers.
- D. Set up the Cisco ASA to authenticate users via a SAML 2.0 IDP.
Answer: A
NEW QUESTION # 60
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. EAP query-identity
- B. EAP-AnyConnect
- C. use of certificates instead of username and password
- D. AnyConnect profile
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION # 61
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$SecureMobilityClient$*
- B. *$AnyConnectClient$*
- C. *$RemoteAccessVpnClient$*
- D. *$DfltlkeldentityS*
Answer: B
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html
NEW QUESTION # 62
Refer to the exhibit.
An engineer is diagnosing an issue that occurred after a router at a branch site was assigned a new address. Based on the debugs, what must be done to resolve this issue?
- A. Ensure that the UDP 500 packets between devices are not dropped.
- B. Add the remote peer's IP address to the server's IKEv2 keyring.
- C. Ensure that the correct preshared keys are set on both sides.
- D. Add the remote peer's identity to the server's IKEv2 profile.
Answer: D
NEW QUESTION # 63
Refer to the exhibit.
The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?
- A. The IP address is incorrect.
- B. UserGroup must match connection profile.
- C. The HostName is incorrect.
- D. Primary protocol should be SSL.
Answer: B
NEW QUESTION # 64
An administrator is setting up Cisco AnyConnect on a Cisco ASA with the requirement that AnyConnect automatically establishes a VPN when a company-owned laptop is connected to the internet outside of the corporate network. Which configuration meets these requirements?
- A. SBL with user certificate authentication
- B. TND with machine certificate authentication
- C. SBL with machine certificate authentication
- D. TND with user certificate authentication
Answer: B
Explanation:
Trusted Network Detection (TND) gives you the ability to have AnyConnect automatically disconnect a VPN connection when the user is inside the corporate network (the trusted network) and start the VPN connection when the user is outside the corporate network (the untrusted network). https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/administration/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html#id_100236
NEW QUESTION # 65
Which two features are valid backup options for an IOS FlexVPN client? (Choose two.)
- A. DNS-based hub resolution
- B. HSRP stateless failover
- C. reactivate primary peer
- D. need distractor
- E. tunnel pivot
Answer: A,C
NEW QUESTION # 66
Refer to the exhibit.
Upon setting up a tunnel between two sites, users are complaining that connections to applications over the VPN are not working consistently. The output of show crypto ipsec sa was collected on one of the VPN devices. Based on this output, what should be done to fix this issue?
- A. Specify the application networks in the remote identity.
- B. Enable perfect forward secrecy.
- C. Make an adjustment to IPSec replay window.
- D. Lower the tunnel MTU.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dplane/configuration/xe-16-8/sec-ipsec-data-plane-xe-16-8-book/sec-ipsec-antireplay.html#GUID-1FF00FBB-0746-48B2-A02A-2BB066BEDEF8
NEW QUESTION # 67
Which method dynamically installs the network routes for remote tunnel endpoints?
- A. route filtering
- B. reverse route injection
- C. policy-based routing
- D. CEF
Answer: B
Explanation:
Reverse route injection (RRI) is a method that dynamically installs the network routes for remote tunnel endpoints. The RRI feature allows the router to automatically learn the routes for the remote networks and automatically install these routes into the routing table. This eliminates the need for the administrator to manually configure and maintain the routes for the remote networks. This feature is commonly used in VPN environments, where the router at the VPN endpoint needs to learn the routes for the remote networks behind the other VPN endpoint. The other options such as policy-based routing, CEF, and route filtering are not used to dynamically install the network routes for remote tunnel endpoints Reference:
NEW QUESTION # 68
Refer to the exhibit.
All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA. What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?
- A. Same-security-traffic permit inter-interface under Group Policy
- B. Exclude Network List Below under Group Policy
- C. Tunnel All Networks under Group Policy
- D. Tunnel Network List Below under Group Policy
Answer: D
NEW QUESTION # 69
In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?
- A. Verify that the spoke receives redirect messages and sends resolution requests.
- B. Verify the spoke configuration to check if the NHRP redirect is enabled.
- C. Verify the hub configuration to check if the NHRP shortcut is enabled.
- D. Verify that the tunnel interface is contained within a VRF.
Answer: A
NEW QUESTION # 70
While troubleshooting, an engineer finds that the show crypto isakmp sa command indicates that the last state of the tunnel is MM_KEY_EXCH. What is the next step that should be taken to resolve this issue?
- A. Verify that the ISAKMP proposals match.
- B. Ensure that UDP 500 is not being blocked between the devices.
- C. Correct the peer's IP address on the crypto map.
- D. Confirm that the pre-shared keys match on both devices.
Answer: D
Explanation:
https://www.networkworld.com/article/2288666/chapter-4--common-ipsec-vpn-issues.html
NEW QUESTION # 71
An engineer must configure remote desktop connectivity for offsite admins via clientless SSL VPN, configured on a Cisco ASA to Windows Vista workstations. Which two configurations provide the requested access? (Choose two.)
- A. SSH bookmark via the SSH plugin
- B. Citrix bookmark via the ICA plugin
- C. Telnet bookmark via the Telnet plugin
- D. RDP2 bookmark via the RDP2 plugin
- E. VNC bookmark via the VNC plugin
Answer: D,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa98/configuration/vpn/asa-98-vpn-config/webvpn-configure-gateway.html
NEW QUESTION # 72
Refer to the exhibit.
Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?
- A. tunnel-group
- B. group-alias
- C. address-pool
- D. group-policy
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/ administration/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html
NEW QUESTION # 73
Refer to the exhibit.
A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?
- A. Remove the maximum SA limit on the remote Cisco ASA.
- B. Reduce the maximum SA limit on the local Cisco ASA.
- C. Correct the crypto access list on both Cisco ASA devices.
- D. Increase the maximum in-negotiation SA limit on the local Cisco ASA.
Answer: D
NEW QUESTION # 74
......
The Cisco 300-730 exam covers topics such as VPN technologies, secure communications, endpoint security, and network security policies. Candidates are expected to have a strong understanding of VPN protocols such as IPsec, SSL, and IKEv2, and be able to configure and troubleshoot VPN connections. Additionally, candidates should be familiar with security policies and best practices for securing network traffic and devices. 300-730 exam format consists of multiple-choice questions and simulation-based questions, and candidates have 90 minutes to complete the exam.
Easy Success Cisco 300-730 Exam in First Try: https://pass4sure.actualpdf.com/300-730-real-questions.html
